發布時間：2017-11-16 9:19:28 來源: 瀏覽次數：

From the stainless steel market, this kind of metal screen price is not expensive, the quality is also good, for small stainless steel reactor can also be designed and manufactured by ourselves. Large size stainless steel reaction kettle can be processed by stainless steel reactor manufacturer. Next to introduce the principle and idea of making this stainless steel reaction kettle. Because all of the problems are due to solid reaction material to the stainless steel reaction kettle bottom caused by precipitation. So the main solution is to avoid precipitation even in the absence of mixing or mixing. This can be through the addition of an auxiliary stainless steel and stainless steel reaction kettle, the reaction kettle auxiliary than they would be a ittle higher, leaving a gap of 3 to 10 cm. This solid reactant will precipitate in the auxiliary stainless steel reaction kettle, and not on the stainless steel reaction kettle bottom is formed on the insulating layer of the actual. Through the convection heat transfer between the stainless steel reactor bottom gap will be continuous and uniform. High strength stainless steel with stainless steel reaction kettle auxiliary (SS314) made with many holes above the aperture ratio of reactants particle size is smaller, the screen will be cut into round. The edge is bent downward to support, and when the solid reaction material is very heavy, a metal ring can be added under the auxiliary bottom as the support. This is to avoid the solid material in stainless steel reaction kettle.

電加熱反應釜不銹鋼反應釜價格較高，微小損壞時沒有必要整臺設備更新，這就需要選用合適的修補法，否則，就會使反應釜被釜里溶劑腐蝕，搪瓷面的損壞會迅速擴大，并由此造成停產、安全事故及環境污染等不可預計的損失。化工行業中使用的反應釜，因?yàn)榻橘|(zhì)的腐蝕性強、反應條件忽冷忽熱、以及運輸、使用、人為等問題，總會出現這樣那樣的搪瓷層損壞,造成生產停止，如大面積脫落，建議選擇不銹鋼反應釜。

Stainless steel reactorhigher prices. Tiny damage when there is no need to update the whole sets ofequipment, which requires selection of appropriate repair method, otherwise, itwill make reaction kettle kettle solvent corrosion, the enamel surface damagewill expand rapidly, resulting in production, safety accidents andenvironmental pollution, dyeing and other unpredictable loss. The reactor usedin the chemical industry, because of strong corrosive medium, reactionconditions by fits and starts, and transportation, the use of human and otherproblems, there is always a kind of enamel layer is damaged, due to stopproduction, such as off a large area, it is recommended to choose stainlesssteel reactor.